JCooler80 JCOOLER For Kontronik 60/80/100 Jive ESC's

1.888.739.4354

Home

Blog

My Account

View Cart $0.00 Cart:

Home > Electronics > Accessories

JCooler80 JCOOLER For Kontronik 60/80/100 Jive ESC's

Reward Points

60 points will be rewarded to you when you buy this item.

Your Price:

$59.99

Next Shipment ETA:

Availability:

In Stock

Item Id: JCooler80

Quantity

Pin It

Description

JCooler80 JCOOLER For Kontronik 60/80/100 Jive ESC's

Features:

specially CNC machined heatsink
The JCooler heatsink was specially designed and machined to fit the Jive ESC series. On the bottom side there is a extension to ensure the best possible transfer of heat to the heatsink.

active fan
For improved air circulation and heat transfer even under bad conditions the JCooler has an active fan which operating voltage is 5.8 to 12.6 volts.

easy installation
Due to its sophisticated design the JCooler is simply mounted with four screws to the Jive ESC.

best possible mounting options
With the 4 CFRP mounting plate fasteners the JCooler can be simply mounted in any kind of model and also ensures rock solid support to the Jive ESC with simply 4 screws or cable ties.

Specifications:

Size:                        50x50x48mm
Weight:                       100 Grams Approx
Fan Voltage:                5.8-12.6 V
Power Consumption:   70 mAh Approx
Power Cable:              45 Cm Approx
Fits:                       Jive 60, Jive 80, Jive 100

Whats Included:

1x aluminum heatsink (engraved & sandblasted)
1x 50mm fan with 40cm power cord
1x CFRP mounting plate
2x machined spacers
4x M3 lock nuts and countersunk screws
1x JR plug
1x thermal compound

Preparation:

power cord length
It's up to Your choice to power the fan with the receiver power (ESC Bec) or with the motor battery connected to the balancer port (up to 3 cells = 12,6 volt). Please measure the length of the power cord and cut it as short as needed.

plugin the power cord:
In case of using the includes JR plug please note the right polarity. The yellow colored cabel is not needed and mustn't be used!

applying thermal grease
Please use only a small amount of the thermal grease. to much thermal grease will interfere the heat transfer!

Frequently Asked Questions:

Does the JCooler fit every model?
The JCooler can be mounted in every model that has at least 50 x 50 x 48 mm for the JCooler 80 and 50 x 50 x 52,4 mm for the JCooler 120.

Does the JCooler work without the fan?
Yes. The JCooler works perfect without the fan. But You will need some more spacer and shorter screws which are not included. Also the cooling effect is not as good as with the attached fan due to less air circulation. So in hard conditions the ESC might shut down.

What's the right amount of thermal grease?
Less is more! Please use only a small amount of thermal grease, to much thermal grease will interfere the heat transfer.

Couln't the Jive ESCs jumper port be used to power up the fan?
No. We do not recommend to use the Jive ESCs jumper port to power up the fan! The jumper port is only for programming purposes and using it for powering up the fan will result in loss of warranty.

You might also like...

1513 32 AWG Micro Servo Wires (per 1 ft.) (per 304.8mm)
Our Price: $0.99
Add

2870 Universal Servo Extension Security Clip
Our Price: $2.99
Add

DUBQ3513 Protective Foam Rubber Sheet, 1/4" for receiver wrap
Our Price: $3.99
Add

MNT1064004 High Grade Rosin Core Solder 60/40 4oz
Our Price: $6.99
Add

Browse Similar Items
Electronics > Brushless ESC's > Kontronik

Products

About Us

Policies

My Account

Support