Home > Electronics > Brushless ESC's > Align >   KX870002A Align 60A Brushless ESC (5-6 Volt) RCE-BL60G
	Our Price: $92.99 Stock Status: In Stock Product Code: KX870002A Qty:

Description   Instructions: - 5-6V step-less adjustable BEC output allowing custom voltage setting to match servo specification. - BEC output utilizing switching power system, suitable for 7.4-22.2V (2s-6s) Li battery, with continuous current rating of 3A, and burst rating of 5A. - Three programmable throttle speed settings to support quick throttle response. - Include soft start and governor mode. - Small and compact PCB design for lightweight and simple installation. - Large heat sink for optimum thermal performance. - Highly compatible to work with 98% of all brushless motors currently on the market. - Ultra-smooth motor start designed to run with all kinds of brushless motors. - The power inlet utilizes a Japanese made "Low ESR" capacitor in order to provide stable power source. - The throttle has more than 200 step resolution that provides great throttle response and control. - If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers. Specifications: - Continuous current: 60Amps with proper air flow cooling - Surge current: 70Amps - Supporting motor types: 2~10 pole in/outrunner brushless motors. - Supporting maximum RPM: 2poles=>190,000rpm;6poles=>63,000rpm - Supporting input voltage: 5.5V~25.2V - Supporting battery types: Li-ion/ Li-poly 2~6 cells - BEC Output voltage: 5-6V step-less adjustment - BEC Continuous current 3A; Burst current 5A - Size:65X28X12mm - Weight:55g Note: 1.When setting to the Quick response speed, the accelerative peak current will increase. 2.To minimize possible radio interference induced by switching power system, BEC should be installed at least 5cm away from the receiver. The use of PCM receiver is recommended. Also Includes: - ALIGN standard 4mm socket terminal x 3 PCS(Max. current 110A) - Heat shrink tube x 3 PCS(Ö5x25mm)

You might also like... K10301A 75A Brushless ESC(Governer Mode) RCE-BL75G Our Price: $90.99 Add Align K10304A 35A Brushless ESC (6 Volt) RCE-BL35X Our Price: $55.99 Add Align K10367A 100A Brushless ESC RCE-BL100G Our Price: $118.99 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Electronics > Brushless ESC's > Align