MIK4465 Scorpion HK-4015-1070 (Logo 400SE)

1.888.739.4354

Home

Blog

My Account

View Cart $0.00 Cart:

Home > Electronics > Brushless Motors & Pinions > Scorpion

MIK4465 Scorpion HK-4015-1070 (Logo 400SE)

Reward Points

120 points will be rewarded to you when you buy this item.

Your Price:

$119.99

Next Shipment ETA:

Availability:

Out of Stock

Item Id: MIK4465



Pin It

Description

IMPORTANT NOTE: If you are purchasing this motor for the Logo400 or Logo400SE , it can ONLY be used with the stock main gear 200t M0.5 and the 22t M0.5 (mik2822) pinion on 6S.... ANY other configuration will result in the motor rubbing the frames...

MIK4465 Scorpion HK-4015-1070 (Logo 400SE)

The Scorpion HK-4015 motors have been developed for the newer 400 to 500 class electric helicopters. The HK-4015-1070 was develpoed specifically for the Logo 400 helicopter running on an 8-cell Li-Po battery pack. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics.

Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

All Scorpion HK-4015 series motors come with 4mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller with matching heat shink tubing. For maximum strength, the Scorpion HK-4015 series motors feature an 8mm motor shaft that is ground down to a 5mm diameter at the output end to fit standard size pinion gears. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 5mm shaft.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 10-12 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

Specifications
Stator Diameter ............................ 40.0 mm (1.575 in)
Stator Thickness ........................... 15.0 mm (0.590 in)
No. of Stator Arms ................................................ 12
No. of Magnet Poles ................................................ 8
Motor Wind ........................................... 12 Turn Delta
Motor Wire ..................... 20-Strand 0.25mm (31 AWG)
Motor Kv ........................................... 1070 RPM / Volt
No-Load Current (Io) ................. 2.02 Amps @ 10 volts
Motor Resistance (Rm) ............................. 0.019 Ohms
Max Continuous Current ............................... 65 Amps
Max Continuous Power .............................. 1900 Watts
Weight ....................................... 215 Grams (7.58 oz)
Outside Diameter .......................... 48.9 mm (1.925 in)
Shaft Diameter ............................. 4.98 mm (0.196 in)
Body Length ................................. 41.5 mm (1.634 in)
Overall Shaft Length ...................... 73.7 mm (2.901 in)
Max Li-Po Cell ....................................................... 8S

You might also like...

Scorpion HK-2221-6 V2 (4400 KV) Trex 450
Our Price: $79.99
Add

MIK4604 Mikado Scorpion HKIII 4020-1100 Kv Brushless Motor
Our Price: $179.99
Add

HK-3536-510 Scorpion (510 KV) Brushless Motor
Our Price: $159.99
Add

MIK4790 Motor Scorpion HK 4525-520 ULTIMATE, Ø8x60mm shaft
Our Price: $386.99
Add

Browse Similar Items
Helicopter Parts > Mikado > Logo 400SE > Motor and ESC

Products

About Us

Policies

My Account

Support