Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (V-Bar). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!)
Preset parameters for many common helicopters
Programming via PC, control panel (item MIK4152), blue-tooth (item MIK4256) or mobile phone
Digital operation means maximal control and ultimate precision! This is also true for scale models with multi-blade rotor heads. A scale pilot can set the parameters so that the heli performs very stable reacts more sluggishly. This is advantage for inexperienced novices. You can reach a new dimension of performance even in fast forward or backward flight.
A further highlight of the VBar is its integrated Heading Hold tail rotor gyro. It has excellent stopping behavior and very constant cyclic and tail rate in any wind condition.
Digital flight performance - like a simulator
Very resistant to wind
Continuously adjustable head set-up, from mild to wild
Weight-reduced, no-play rotor head with less parts
Straightforward set-up, easily reproduced
Reduced air drag, releasing more power and giving longer flight times (e-powered helis!)
Full Size V-Bar
Version 5.0 Express PC Software
Patch Cables: 3.1" For use with a primary receiver (if you opt NOT to use Satellites)
2-Sided Gyro Tape
Support site: http://www.vstabi.info/en
The full size V-Bar will include Version 5.2 Express software.
The full size V-Bar does have provisions for a Nitro governor feature, however, the governor can ONLY be used with the Pro version software. It will not work with Express software.
Software to run the governor will be available for download shortly after release and will be included in a free update patch for the Pro software.
Version 5.2 Pro software is available for purchase and download here: http://www.mikado-heli.com.hk/
PLEASE PAY SPECIAL ATTENTION TO THE SENSOR PORT, IF PLUGGED IN BACKWARDS IT WILL BURN THE SENSOR.
Ready Heli, Eat. Sleep. 3D., Ready Heli Logo, Its a Heli Thing, 3 Box Logo 2005-2013 Net Worth Holdings, Inc.. All rights reserved.1700 Park Lane South Suite #8 Jupiter, Florida 33458