These Kits Include all the updated parts from MSH

New, lightweight, quiet & superbly engineered - the MSH Protos is 2008's most anticipated new helicopter. Incredible performance & agility.

MSH 500 Protos Specifications:
- Stock motor: 800KV, 1100W, 4s-6s
- Stock MSH 80A ESC
- Included 425mm SAB CF Blades
- Maingear: 93T
- Pinion: from 15T to 20T - (15T Included in the kit)
- Innovative single belt drive (motor->main gear->tail)
- 2mm flybar, Gorilla Gear programmable paddles
- 4mm tail grip root
- 1520g all-up-weight (AUW) with a 6s lipo 2500mAh
- 17mm OD aluminum tail boom
- Supports mini sized servos having 2 mounting holes or 1 mounting holes
- LiPo from 4S (~3700mAh) to 6S (~2500mAh)
- A123 7S 2300mAh humpback slab pack (2 cells over 5 cells). The auw becomes ~1700g
- Metal hub, metal swashplate, plastic tail box, main grips and tail grips
- Programmable flybar mainblade ratio
- The tail grips with integrated Chinese weights so even with a mini size tail servo can have the same performance as a full size tail servo
- Very low risk of static problems
- Frame material: plastic + 30% carbon
- Gorilla Gear landing gear

MSH 80A ESC Technical Specs:
-Battery : 5 -18 NiCd / NiMh or 2 - 6 LiPo
-UBEC System : Up to 8 servos 4Amp cont.
-Brake : On /Off
-Switching frequency : 8 kHz / 16 kHz
-Timing mode : Mode 1 – Mode 2 - Mode 3
-Rotation : Normal/Inverse
-Cutt off voltage : Stop / Reduce power / Disabled
-Temp control : Cut off motor on temp above 212°F / 100°C
-Max RPM (2-pole) : 200,000
-Governor (Active RPM) : On / Off
-Weight  : 56 g (including wire and motor plug)
-Dimensions : 77mm x 28mm x 14mm