VT400040C10S Voltz 4000mAh 10S 37.0V 40C Lipo Pack

Please note that all of the Voltz 4000mAh 10s 37.0V 40C Lipo packs are now equipped with two (5s + 5s) JST-XH balance connectors. This means that the battery can only be balanced as a 5s + 5s split stick, similar to a Hyperion split stick. The Voltz JST-XH balance board is necessary to balance charge this battery when using the Voltz iCharger.

Pack Usage:  Best Voltz pack to use with Logo600. Also makes a very light Logo600SE on 10S.

Voltz Lithium Polymer batteries are low-cost, high performance packs that deliver their full capacity & meet their discharge ratings. These batteries are intended to deliver the maximum amount of fun with the least amount of sticker-shock possible!

Overview:
This is a special type of battery; it is a "split pack" type (in order to conform to shipping regulations). This means that instead of it being a solid 10s battery, it is actually two 5s batteries in one.

In order to use this as a 10s flight pack, simply connect the two short "serial" wires together. This connects the two 5s packs into one 10s pack. The two long output wires are the discharge wires.

This battery comes with 6mm bullet connectors pre-soldered.

Specs:
- Voltage: 37V
- Capacity: 4000mAh
- Discharge Rating: 40C
- Burst Discharge Rating: 80C
- Charge Rate: 1-3C Recommended, 4C Max
- Size: 272mm(L) 44mm(W) 41mm(H)
- Weight: 1074.4g
- Max Continuous Discharge: 40C (160A)
- Max Burst Discharge: 80C (320A)
- Balance Plug: JST-XH

Limited Warranty:
Voltz batteries are guaranteed against any manufacturer defects. This includes solder joints, cell balance, etc. There is an extended warranty for these batteries. ALL warranty claims must be made within 90 days from date of purchase!

A new battery from the people at Revco that brought you EDGE Rotorblades and Hard One Pinions and Gears!